History of Internet

Saturday, February 5, 2011 | | 0 comments

    The History of the Internet has precursors that date back to the 19th century, especially the telegraph system, more than a century before the digital Internet became widely used in the second half of the 1990s. The concept of data communication - transmitting data between two different places, connected via some kind of electromagnetic medium, such as radio or an electrical wire - actually predates the introduction of the first computers. Such communication systems were typically limited to point to point communication between two end devices. Telegraph systems and telex machines can be considered early precursors of this kind of communication. The earlier computers used the technology available at the time to allow communication between the central processing unit and remote terminals. As the technology evolved new systems were devised to allow communication over longer distances (for terminals) or with higher speed (for interconnection of local devices) that were necessary for the mainframe computer model. Using these technologies it was possible to exchange data (such as files) between remote computers. However, the point to point communication model was limited, as it did not allow for direct communication between any two arbitrary systems; a physical link was necessary. The technology was also deemed as inherently unsafe for strategic and military use, because there were no alternative paths for the communication in case of an enemy attack.

    As a response, several research programs started to explore and articulate principles of communications between physically separate systems, leading to the development of the packet switching model of digital networking. These research efforts included those of the laboratories of Vinton G. Cerf at Stanford University, Donald Davies (NPL), Paul Baran (RAND Corporation), and Leonard Kleinrock at MIT and at UCLA. The research led to the development of several packet-switched networking solutions in the late 1960s and 1970s, including ARPANET, Telenet, and the X.25 protocols. Additionally, public access and hobbyist networking systems grew in popularity, including unix-to-unix copy (UUCP) and FidoNet. They were however still disjointed separate networks, served only by limited gateways between networks. This led to the application of packet switching to develop a protocol for internetworking, where multiple different networks could be joined together into a super-framework of networks. By defining a simple common network system, the Internet Protocol Suite, the concept of the network could be separated from its physical implementation. This spread of internetworking began to form into the idea of a global network that would be called the Internet, based on standardized protocols officially implemented in 1982. Adoption and interconnection occurred quickly across the advanced telecommunication networks of the western world, and then began to penetrate into the rest of the world as it became the de-facto international standard for the global network. However, the disparity of growth between advanced nations and the third-world countries led to a digital divide that is still a concern today.

    Following commercialization and introduction of privately run Internet service providers in the 1980s, and the Internet's expansion for popular use in the 1990s, the Internet has had a drastic impact on culture and commerce. This includes the rise of near instant communication by electronic mail (e-mail), text based discussion forums, and the World Wide Web. Investor speculation in new markets provided by these innovations would also lead to the inflation and subsequent collapse of the Dot-com bubble. But despite this, the Internet continues to grow, driven by commerce, greater amounts of online information and knowledge and social networking known as Web 2.0.
READ MORE - History of Internet

Sejarah Internet

| | 0 comments

Internet merupakan jaringan komputer yang dibentuk oleh Departemen Pertahanan Amerika Serikat di tahun 1969, melalui proyek ARPA yang disebut ARPANET (Advanced Research Project Agency Network), di mana mereka mendemonstrasikan bagaimana dengan hardware dan software komputer yang berbasis UNIX, kita bisa melakukan komunikasi dalam jarak yang tidak terhingga melalui saluran telepon.

Proyek ARPANET merancang bentuk jaringan, kehandalan, seberapa besar informasi dapat dipindahkan, dan akhirnya semua standar yang mereka tentukan menjadi cikal bakal pembangunan protokol baru yang sekarang dikenal sebagai TCP/IP (Transmission Control Protocol/Internet Protocol).

Tujuan awal dibangunnya proyek itu adalah untuk keperluan militer. Pada saat itu Departemen Pertahanan Amerika Serikat (US Department of Defense) membuat sistem jaringan komputer yang tersebar dengan menghubungkan komputer di daerah-daerah vital untuk mengatasi masalah bila terjadi serangan nuklir dan untuk menghindari terjadinya informasi terpusat, yang apabila terjadi perang dapat mudah dihancurkan.

Pada mulanya ARPANET hanya menghubungkan 4 situs saja yaitu Stanford Research Institute, University of California, Santa Barbara, University of Utah, di mana mereka membentuk satu jaringan terpadu di tahun 1969, dan secara umum ARPANET diperkenalkan pada bulan Oktober 1972. Sekitar tahun 1973, DARPA bekerjasama dengan berbagailembaga pendidikan dan institusi reset, memulai program riset untuk menginvestigasi
teknik ddan teknologi yang mamapu menyatukan paket-paket jaringan dalam beragam bentuk. Sasaran utamanaya adalah mengembangakan protocol komunikasi yang memunkinkan Komputer-komputer dapat berkomunikaasi secara transparan
melintasi multi paket jaringan yang terhubung. Ini dikenal dengan “the Internetting project” dan “the system of networks”, yang kemudian melahirkan “Internet”. Pada periode berikutnya pengembangan Internet semakin serius dan terbuka.

Tidak lama kemudian proyek ini berkembang pesat di seluruh daerah, dan semua universitas di negara tersebut ingin bergabung, sehingga membuat ARPANET kesulitan untuk mengaturnya.
Oleh sebab itu ARPANET dipecah manjadi dua, yaitu "MILNET" untuk keperluan militer dan "ARPANET" baru yang lebih kecil untuk keperluan non-militer seperti, universitas-universitas. Gabungan kedua jaringan akhirnya dikenal dengan nama DARPA Internet, yang kemudian disederhanakan menjadi Internet. Saat ini ribuan partisipasian, baik organisasi, vendor, maupun individdu dari berbagai belahan dunia turut terlibat di dalamnya.





READ MORE - Sejarah Internet

Pengertian BIOS

| | 0 comments

  BIOS (Basic Input Output System) lahir bersamaan dengan diciptakannya komputer IBM PC oleh IBM pada tahun 1981. Pada awalnya, BIOS hanya ada satu macam, yaitu IBM BIOS. Namun, perusahaan komputer Compaq kemudian melakukan reverse engineering pada IBM BIOS dan kemudian membuat IBM BIOS compatible, yaitu BIOS yang kompatibel dengan IBM BIOS dan dapat digunakan pada PC. BIOS yang dibuat oleh Compaq ini kemudian disertakan pada PC buatan Compaq, menggantikan IBM BIOS sepenuhnya. Selanjutnya banyak perusahaan lain yang bermunculan sebagai pembuat BIOS untuk PC, seperti Phoenix, AMI, dan Award. Khusus untuk motherboard yang dibuat di Taiwan, sebagian besar BIOS yang digunakan adalah Award BIOS. Alasannya sederhana, Award Inc. adalah perusahaan pembuat BIOS yang juga berbasis di Taiwan.

Kegunaan BIOS

    BIOS tidak hanya digunakan pada PC saja. Melainkan juga digunakan pada banyak platform. Misalnya, pada platform Power PC, GameBoy Advance, Xbox, Itanium, dan lain-lain. Namun demikian, BIOS pada platform yang berbeda isinya juga pasti berbeda. Pada platform apapun, BIOS memegang fungsi dasar yang sama, yaitu menginisisalisasi seluruh perangkat yang ada pada platform tersebut agar siap digunakan oleh sistem operasi.

    Inisialisasi oleh BIOS dibutuhkan karena sebuah sistem tidak dapat dibuat sedemikian rupa untuk mengenali dan menginisialisasi seluruh perangkat yang ada. Hal ini dikarenakan perkembangan hardware lebih cepat dibandingkan dengan perkembangan software (sistem operasi). Sehingga setiap kali terdapat chipset baru yang dikelurakan, pembuat sistem operasi tidak harus mengeluarkan patch untuk menginisialisasi chipset tersebut
Pada PC BIOS diimplementasikan bukan hanya pada motherboard, tetapi juga pada beberapa jenis ad-on card. Misalnya, graphics card, EIDE controller card, RAID controller, SCSI controller card, LAN card, dan lain-lain. Semua BIOS tersebut mempunyai fungsi dasar yang sama, yaitu menginisialisasi perangkat tempat BIOS tersebut berada. BIOS pada expansion card disebut juga ROM atau option ROM.
READ MORE - Pengertian BIOS

Computer POST

Friday, February 4, 2011 | | 0 comments

The computer POST (Power On Self Test) tests the computer, insuring that it meets the necessary system requirements and that all hardware is working properly before starting the remainder of the boot process. If the computer passes the POST the computer will have a single beep (with some computer BIOS manufacturers it may beep twice) as the computer starts and the computer will continue to start normally. However, if the computer fails the POST, the computer will either not beep at all or will generate a beep code, which tells the user the source of the problem.
The steps of a POST
Each time the computer boots up the computer must past the POST. Below is the common steps a POST performs each time your computer starts.

1. Test the power supply to ensure that it is turned on and that it releases its reset signal.
2. CPU must exit the reset status mode and thereafter be able to execute instructions.
3. BIOS checksum must be valid, meaning that it must be readable.
4. CMOS checksum must be valid, meaning that it must be readable.
5. CPU must be able to read all forms of memory such as the memory controller, memory bus, and memory module.
6. The first 64KB of memory must be operational and have the capability to be read and written to and from, and capable of containing the POST code.
7. I/O bus / controller must be accessible.
8. I/O bus must be able to write / read from the video subsystem and be able to read all video RAM.

If the computer does not pass any of the above tests, your computer will receive an irregular POST. An irregular POST is a beep code that is different from the standard one or two beeps. This could be either no beeps at all or a combination of different beeps indicating what is causing the computer not to past the POST.
READ MORE - Computer POST

Cara Crimping Konektor RJ-45 pada Kabel UTP

Thursday, February 3, 2011 | | 0 comments

Pengkabelan
1. Kupas lapisan luar kabel UTP sepanjang ± 1,5 Cm dari ujung, sehingga 8 urat kabel terlihat dari luar.

2. Potong ujung-ujung kabel yang tidak rata dengan pemotong kabel (bagian yang hanya memiliki satu buah pisau dan satu bagian lagi datar pada crimp tool adalah pemotong kabel) sampai rapi. Usahakan jarak antara pembungkus kabel sampai ujung kabel tidak lebih dari 1cm.


3. Susun urutan warna kabel sesuai dengan standard internasional
Untuk kabel straight menggunakan standar T568A pada kedua ujung kabel. Seperti pada gambar berikut



Straight kabel biasa digunakan untuk koneksi dari PC ke Switch.



Untuk kabel crossover menggunakan standar T568A dan T568B pada ujung kabel. Seperti pada gambar berikut


Cross cable biasa dipakai untuk koneksi dari PC to PC / PC to Router, Switch to Switch.


4. Masukkan Ujung kabel UTP yang telah disusun menurut urutan internasional,
kemudian jepit dengan menggunakan crimping tool.
Seperti pada gambar berikut ini


5. Apabila kita yakin sudah memasang kabel UTP ke RJ-45 dengan kuat selanjutnya adalah test dengan menggunakan LAN tester apabila ada. Apabila anda tidak memiliki LAN tester jangan takut anda cukup melihat kembali kabel yang sudah terpasang, memastikan bahwa anda sudah cukup kuat memasang nya dan semua ujung kabel terlihat dari bagian depan RJ-45 maka hampir bisa dipastikan pemasangan kabel UTP tersebut sukses.
READ MORE - Cara Crimping Konektor RJ-45 pada Kabel UTP

Silahkan masukkan link anda di sini,, dan jangan lupa pasang link balik